Home Security

Guide · Homeowners · 3 min read · Updated 17 November 2026

Wired vs Wireless Burglar Alarms: Which Is Better for Your Home?

Short answer

Wireless burglar alarms are quicker and tidier to install, cost less to fit in a finished home and are easy to extend, but each device runs on batteries. Wired alarms take longer to install and suit renovations or new builds, with fewer batteries to maintain. Both can meet recognised standards such as BS EN 50131 when professionally designed. Choose based on your home, not on myths about reliability.

Wired vs Wireless Burglar Alarms: Which Is Better for Your Home?

How the two types work

Every intruder alarm has a control panel, detectors that sense movement or doors opening, a way to set and unset the system, and a sounder to raise the alarm. In a wired system, each detector is connected to the panel by cable, which carries power and signals. In a wireless system, detectors communicate with the panel by radio and run on their own batteries. Hybrid systems mix both, often with a wired panel and wireless devices where cables are hard to run.

Modern wireless alarms use two-way encrypted radio, supervision that reports if a device stops communicating, and detection of jamming attempts. Older one-way wireless systems lacked some of these features, which is where reliability concerns came from.

FactorWired alarmWireless alarm
Typical fitted price£600–£1,300£450–£1,000
Installation timeOften a full day or moreOften half a day to a day
DisruptionCables run through walls, floors or ceilingsMinimal
BatteriesPanel backup batteryPanel plus every detector
Extending laterNew cables neededAdd devices easily

Advantages of wireless alarms

Wireless alarms are the most common choice for existing homes because they avoid lifting floorboards or chasing walls. Installation is often finished in a day with little mess, which suits decorated homes, rented properties and listed buildings where cable routes are a problem. Devices can be moved or added easily if you extend, convert a loft or add a garden office.

Most wireless systems integrate well with smartphone apps, giving notifications, remote setting and unsetting and event history. Many also support wireless smoke, heat and flood detectors linked to the same panel.

  • Faster, tidier installation in finished homes
  • Easy to add detectors later
  • Strong app integration on most systems
  • Can move with you in some cases
  • Good choice for flats and rented homes

Advantages of wired alarms

Wired alarms have no detector batteries to replace and no radio link that could be affected by interference. Once installed, they need relatively little attention beyond the panel battery and annual servicing. They are a natural choice when cables can be laid easily, such as during a rewire, extension or new build, and many installers prefer wired systems for larger homes with thick stone walls that can weaken radio signals.

Cost is the main drawback in a finished home. Running cables neatly to every detector takes time and can mean disturbing decoration, which pushes up the price.

Reliability and security

Both types can be highly reliable when well designed and installed. The bigger factors are the quality of the equipment, the positioning of detectors, the grade of the system and regular servicing. In the UK, intruder alarms are commonly designed to BS EN 50131, which sets four security grades based on the risk, with PD 6662 setting out how the standard applies here. Most homes are fitted to Grade 2, while higher-risk properties may warrant Grade 3.

Wireless alarms that meet the relevant grade include protections against jamming and tampering. Ask the installer what grade the system is designed to and whether the equipment is certified for that grade.

Battery care for wireless systems

Battery life on wireless detectors commonly runs to several years, depending on the device and how often it is triggered. A good system reports low batteries on the panel and app well before they run out. Replace them promptly with the type specified by the manufacturer, or ask your installer to change them during the annual service.

Detectors in busy hallways or that use cameras or extra features may drain batteries faster. Note when batteries were last replaced so you are not caught out.

Keep a spare set of the correct batteries at home, so a low-battery warning can be dealt with the same day.

Which should you choose?

Choose wireless if you live in a finished home, want minimal disruption, rent, or expect to extend the system later. Choose wired if you are renovating, building, rewiring or have very thick walls, and you prefer fewer batteries over time. Hybrid systems are a sensible middle ground for larger homes. Whatever you choose, the right number and position of detectors, a visible external sounder, sensible monitoring and regular servicing matter more than the cabling method.

If you want police response, the system must be installed and maintained by a company certified by an approved body, such as NSI or SSAIB, so factor that into who you hire.

For a typical semi-detached or terraced home with no building work planned, a professionally installed wireless system is the usual recommendation.

Questions to ask before buying

Ask the installer what grade the system meets, whether wireless devices use two-way encrypted radio with supervision, and how the panel communicates alerts: by app, speech dialler or an alarm receiving centre. Ask how long detector batteries typically last and what servicing costs. Ask how false alarms are prevented, particularly with pets, and what happens to your system if the installer stops trading. Clear answers to these questions say more about quality than a brochure.

Questions people also ask

Are wireless alarms as reliable as wired alarms?

Modern professionally installed wireless alarms with two-way encrypted radio and supervision are very reliable for most homes. Reliability depends more on equipment quality, detector placement and servicing than on the cabling method. Very thick walls or large properties may favour wired or hybrid systems.

Can wireless burglar alarms be jammed?

Jamming is possible in principle, but good wireless alarms detect jamming attempts and raise a fault or alarm. Systems designed to the appropriate grade of BS EN 50131 include protection against interference and tampering. Ask your installer how the system responds to jamming.

How long do wireless alarm batteries last?

Detector batteries commonly last several years, depending on the device, battery type and how often it is triggered. The panel and app should warn you when a battery is low. Many owners have them replaced during the annual service to avoid unexpected faults.

Written and checked by the Home Security team. Read our editorial policy.

Get a free home security quote

Tell us what you need and we'll come back with a clear price.

Request a quote